Page 1 of 1
Velleman k8055, Arduino
Posted: Wed Sep 22, 2010 9:53 pm
by fabgar
Hi, are there any plans to support other widely used interface boards, like the Velleman K8055 or Arduino boards ?
or is there a way now to integrate them or communicate with them.
thanx
Re: Velleman k8055, Arduino
Posted: Wed Sep 22, 2010 11:50 pm
by admin
It is our intention to support as many boards as possible! As our user base grows so will the supported interfaces.
Also there are new things coming out all of the time so this will be a process to evaluate and include the better ones.
As far as the Velleman boards they need us to do some programming to get them to work. If they send us one to test we may include it! Some of the Arduino boards should already work as the use the FTDI USB to serial chip which comes up as a com port on the PC which we already support.
Right now Phidgets has the largest range of supported interfaces!
http://www.phidgets.com
Re: Velleman k8055, Arduino
Posted: Thu Sep 23, 2010 12:36 am
by fabgar
thank you for the quick and informative reply
this is really an amazing project !
Re: Velleman k8055, Arduino
Posted: Tue May 10, 2011 4:35 am
by DSPWill
Hello,
I have started a thread about using FlowStone with an Arduino Uno on the Arduino website form. I have had some good, but very basic results.
Using FlowStone with an Arduino (Uno in my case) is VERY possible! I just need some help with the Uno "sketch" (program).
Thanks in advance!
DSPWill