Auto Correlation
Posted: Mon Jul 12, 2010 4:46 pm
This example shows how to use the Auto Correlation Module to correlate a signal with itself or two separate real-time signals.
In this case a sine wave input is used and correlated with itself, the slider controls the delay factor for the Correlation
The real-time Correlation factor is output as well as the average correlation factor.
Basically the output is highest when the two signals match or are in phase.
In this case a sine wave input is used and correlated with itself, the slider controls the delay factor for the Correlation
The real-time Correlation factor is output as well as the average correlation factor.
Basically the output is highest when the two signals match or are in phase.