DSP Robotics Support

I decided to make a new version of Venus. Now its a bit more
flexible having a few 'sections' of strings, choir, a cheesy sounding trumpet and so on with their own envelopes and vca. I wish i new who made the phaser so i could give him/her the credit but oh well. Lastly there is a couple of presets for your entertainment aswell

I hope you like it. Please stay healthy and indoors!



UPDATE:

Moved preset manager to the top.

Good morning Halon,

thank you for the schematic. I do much appreciate that you are not permanently frustrated by the lack of response for your previous posts. Although I'm afraid I cannot look at your issues immediately - too much work - Xmas break is coming.
Have a fine day and thank you again.

Regards
Phil

Halon wrote:
... it doesnt have any mod or pitch wheel, as I have no clue
how to add such a thing. Could someone perhaps help me with that?

This is nice! Your skills are progressing very fast!

If you have a look inside my Quilcom Blender 2, look into the Global module and you will find a pitchbend scheme and a modwheel source. There’s probably more than you want in that module but you should be able to make use of what you need and see how it connects into the schematic.

viewtopic.php?f=3&t=13847&start=0

Any questions just ask.

Good luck and well done so far.

Spogg

Here are some analog LEDs e.g. to show LFO activity etc.

martinvicanek wrote:Here are some analog LEDs e.g. to show LFO activity etc.

Very nice Martin

Cheers

Spogg

Thanks Halon

Hello Halon,

A really nice "String machine", keep up the greak work!

Here is a version with a "Pitch Wheel", place it in your GUI where you like it.

Later then, BobF......

Phil Thalasso wrote:Good morning Halon,

thank you for the schematic. I do much appreciate that you are not permanently frustrated by the lack of response for your previous posts. Although I'm afraid I cannot look at your issues immediately - too much work - Xmas break is coming.
Have a fine day and thank you again.

Regards
Phil

Good morning to you too

No im not frustrated by that. All fine. Thanks for chiming in Phil.

Spogg wrote:

Halon wrote:
... it doesnt have any mod or pitch wheel, as I have no clue
how to add such a thing. Could someone perhaps help me with that?

This is nice! Your skills are progressing very fast!

If you have a look inside my Quilcom Blender 2, look into the Global module and you will find a pitchbend scheme and a modwheel source. There’s probably more than you want in that module but you should be able to make use of what you need and see how it connects into the schematic.

viewtopic.php?f=3&t=13847&start=0

Any questions just ask.

Good luck and well done so far.

Spogg

Thanks a lot Spogg. Appreciated as always.

martinvicanek wrote:Here are some analog LEDs e.g. to show LFO activity etc.

Thanks a lot Martin. Appreciate it!

BobF wrote:

Venus Stringmachine.fsm

Hello Halon,

A really nice "String machine", keep up the greak work!

Here is a version with a "Pitch Wheel", place it in your GUI where you like it.

Later then, BobF......

Thanks for that Bob!

wlangfor@uoguelph.ca wrote:Thanks Halon

No problem

New version is up. Please check first post.

Bump.