Velleman k8055, Arduino

For general discussion related FlowStone
Post Reply
fabgar
Posts: 2
Joined: Wed Sep 22, 2010 9:32 pm

Velleman k8055, Arduino

Post by fabgar »

Hi, are there any plans to support other widely used interface boards, like the Velleman K8055 or Arduino boards ?

or is there a way now to integrate them or communicate with them.

thanx
User avatar
admin
Site Admin
Posts: 231
Joined: Tue May 11, 2010 6:30 pm

Re: Velleman k8055, Arduino

Post by admin »

It is our intention to support as many boards as possible! As our user base grows so will the supported interfaces.

Also there are new things coming out all of the time so this will be a process to evaluate and include the better ones.

As far as the Velleman boards they need us to do some programming to get them to work. If they send us one to test we may include it! Some of the Arduino boards should already work as the use the FTDI USB to serial chip which comes up as a com port on the PC which we already support.

Right now Phidgets has the largest range of supported interfaces! http://www.phidgets.com
fabgar
Posts: 2
Joined: Wed Sep 22, 2010 9:32 pm

Re: Velleman k8055, Arduino

Post by fabgar »

thank you for the quick and informative reply

this is really an amazing project !
DSPWill
Posts: 4
Joined: Thu Nov 11, 2010 3:46 am

Re: Velleman k8055, Arduino

Post by DSPWill »

Hello,
I have started a thread about using FlowStone with an Arduino Uno on the Arduino website form. I have had some good, but very basic results.

Using FlowStone with an Arduino (Uno in my case) is VERY possible! I just need some help with the Uno "sketch" (program).

Thanks in advance!
DSPWill
Post Reply