Gate to Amp. How do i do that?

lalalandsynth · Post by **lalalandsynth** » Sat Oct 06, 2018 8:22 am

Maybe check this thread.
viewtopic.php?f=2&t=13380

Halon · Post by **Halon** » Mon Oct 08, 2018 6:58 pm

martinvicanek wrote:
Halon wrote:A lot of synthesizers have the option to switch from Envelope to Gate for the Amplifier, so you might use the envelope for other tasks (modulation).

You can keep the amp envelope and use another envelope for other tasks, no?

Yes but I would like to simulate a classic monophonic 1 envelope synthesizer.

lalalandsynth wrote:Maybe check this thread.
viewtopic.php?f=2&t=13380

Will have a look thanks.

Spogg wrote:The MIDI to Voice and Voice to Poly prims open a channel when a note is pressed. While the channel is open (a note is sounding) you can switch on and off any signal you wish.

You must have a minimum of one envelope prim in the poly system. The prim tells the software when to close a poly channel.

When note-off happens the envelope prim has to be told to close the channel, otherwise each new channel opened will never be turned off and the CPU will rocket.

If that’s not clear I could maybe make a demo...

Cheers

Spogg

You have helped me a lot so il afraid to ask :oops:

.. but could you?

nix · Post by **nix** » Mon Oct 08, 2018 10:19 pm

Is this what we're after?->

env or gate3081.fsm: (29.88 KiB) Downloaded 984 times

Hope helps!

Spogg · Post by **Spogg** » Tue Oct 09, 2018 8:20 am

That's the kind of thing I had in mind Nix!

Cheers

Spogg

nix · Post by **nix** » Tue Oct 09, 2018 10:42 am

cool

IMO-It would work prolly without any envelope at all,
and just the gate to turn it on and off-
if u meant to intonate it mightn't Spogg mate

addendum--I thought it best to test. It's OK to use the gate and have no envelope in the schematic

Spogg · Post by **Spogg** » Tue Oct 09, 2018 5:06 pm

nix wrote:
... It's OK to use the gate and have no envelope in the schematic

Hmmm... Seems I was wrong then. :oops:

Something to learn every day with FlowStone!

Cheers

Spogg

Halon · Post by **Halon** » Tue Oct 09, 2018 7:30 pm

Thanks Nix, but for some reason i cant open your schematic.

This is true with other schematics I have downloaded feom you.

nix · Post by **nix** » Wed Oct 10, 2018 1:19 am

darn mate-
this is for FS 3081,
it really should open in it.

Here are images->

: option 1_0.png (57.18 KiB) Viewed 17142 times

^this one doesn't use gate

: option 2_0.png (59.46 KiB) Viewed 17142 times

^this one multiplies by gate

hope helps

Halon · Post by **Halon** » Wed Oct 10, 2018 9:41 pm

I have the FL Studio version of SynthMaker/Flowstone. But thank you for the images.

nix · Post by **nix** » Thu Oct 11, 2018 5:36 am

No worries!
I'll keep your version in mind.
I'm only running Fruity 7 and 20 atm,
but maybe Image_Line will like the 64 bit version on FS-
and we can try to popularize it more

Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?

Re: Gate to Amp. How do i do that?