Pressure sensor at 10 ms

[geab]

Any recommedation/experience with a pressure sensor that works together with FlowBoard DAQ
and Flowstone and can be sampled at 10 ms. Sensitivity should be at least 10 Pa or lower.
Thanks, Gernot

[Cat5]

You could just use the pressure sensor from Phidgets and connect it to the FlowBoard DAQ

You might need to use a potential divider (2 resistors)to get the correct voltage range for the FlowBoard (3.3V)

Heres the link :

http://www.phidgets.com/products.php?category=1&product_id=1115

Edit: Just noticed you wanted a lower pressure ;(

[geab]

Thank you Cat5

I am not sure at would sample rate I could get data from the Phidget pressure sensor. If they can sample at down to 10 ms it would be great.

Cheers