If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
Users are reminded of the forum rules they sign up to which prohibits any activity that violates any laws including posting material covered by copyright
Auto Correlation
Auto Correlation
This example shows how to use the Auto Correlation Module to correlate a signal with itself or two separate real-time signals.
In this case a sine wave input is used and correlated with itself, the slider controls the delay factor for the Correlation
The real-time Correlation factor is output as well as the average correlation factor.
Basically the output is highest when the two signals match or are in phase.
In this case a sine wave input is used and correlated with itself, the slider controls the delay factor for the Correlation
The real-time Correlation factor is output as well as the average correlation factor.
Basically the output is highest when the two signals match or are in phase.
- Attachments
-
- Auto Correlation.fsm
- Auto Correlation
- (26.78 KiB) Downloaded 2888 times