Synthmaker bundle

[DrewDale]

Latest Toneboardz - Section II Total level, not showing values under the slider.

[k brown]

Ooops - thanks for catching that.

[DrewDale]

Also just noticed the recent 80-vox logo is different font on my machine compared to the screenshot in the dropbox folder. (sorry for detail spotting)

[RJHollins]

Have to be careful with custom or non-standard fonts.

I use the 'capture and save as graphics' module that was created, to snapshot any special text so that it will always display as intended.

I forget who made the module, but it was called something like, 'Save Background'.

[k brown]

Here's an example of the kind of thing that would prompt me to do a new build. I was checking out what instruments various members of this and other forums used and saw that Knob Twiddler had a JP-8000. Didn't know anything about it, so in checking it out was very intrigued by it's Sawtooth re-shaping control - I've never encountered anything quite like it. It morphs from a sine-boosted saw, to pure saw, to saw with fundamental weakened by an inverted sine, to pure sine, to sine-boosted ramp - all via a single slider! And the wave-shifting can be LFO-modulated! One immediately thinks: "Hmm, how could I do that with Synthmaker?".

Other waves also interesting: a triangle with modulatable wavefolding and Noise with it's own dedicated LPF. I didn't include the JP's famous (infamous?) SuperSaw both because I'm sick of hearing that sound, but mostly because doing a supersaw in Synthmaker results in too-high CPU load. The Feedback wave I didn't do simply because the manual is too vague about exactly what it was, and without the instrument here to listen to - no idea what it actually sounded like.

The JP's panel design I found rather unattractive (not crazy about black and blue panels) and since I noticed a distinct similarity between it's structure and that of Gaia, I adapted those panel graphics for -

Rolend noSoupRsaw :

Rolend noSoupRsaw_copy.jpg (75.44 KiB) Viewed 30301 times

[k brown]

Have to be careful with custom or non-standard fonts.

I use the 'capture and save as graphics' module that was created, to snapshot any special text so that it will always display as intended.

I forget who made the module, but it was called something like, 'Save Background'.

Interesting - I've just been doing it with a screenshot loaded into an Image module.

This must be something new in Flowstone - I don't see anything like this in Synthmaker.

[k brown]

Also just noticed the recent 80-vox logo is different font on my machine compared to the screenshot in the dropbox folder. (sorry for detail spotting)

Duly 'burned' now.

[RJHollins]

Have to be careful with custom or non-standard fonts.

I use the 'capture and save as graphics' module that was created, to snapshot any special text so that it will always display as intended.

I forget who made the module, but it was called something like, 'Save Background'.

Interesting - I've just been doing it with a screenshot loaded into an Image module.

This must be something new in Flowstone - I don't see anything like this in Synthmaker.

back home now ...

The module I was speaking of is called 'Background Render Kit'.

It was written by one of the members [don't recall exactly]. It might have been from the SM daze.

It is really handy ... if its' not floating on the forum, let me know, and I'll try to post it.

[RJHollins]

ah yes ... found it.

It was written by the talented Youlean.
http://www.dsprobotics.com/support/viewtopic.php?f=2&t=3949&hilit=background+render

and is for FS.

[k brown]

Aw, aint 'e cute.

Rolend SH-3p.jpg (92.13 KiB) Viewed 30261 times