If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
Users are reminded of the forum rules they sign up to which prohibits any activity that violates any laws including posting material covered by copyright
Baq EQ example
-
regressor18
- Posts: 12
- Joined: Thu Jun 25, 2015 3:23 pm
Baq EQ example
Attached is a Baq EQ I did that closely emulates my Dangerous EQ in my rack. I used Plugin Doctor to very closely match my shelves to the hardware.
I would love for the community to take a look at this fsm and assist in optimizing. Under the hood, its very basic. 1 LS and 1 HS, both are using Martin's ZDF. Martin, if you are reading this THANK YOU for all of your work with Flowstone. I will say the HS at higher frequencies is experiencing Nyquist warping.
Lastly I did use an older beta of the 64 bit version to build this.
Matt
I would love for the community to take a look at this fsm and assist in optimizing. Under the hood, its very basic. 1 LS and 1 HS, both are using Martin's ZDF. Martin, if you are reading this THANK YOU for all of your work with Flowstone. I will say the HS at higher frequencies is experiencing Nyquist warping.
Lastly I did use an older beta of the 64 bit version to build this.
Matt
- Attachments
-
- BaxEQ example.fsm
- BaxEQ
- (165.37 KiB) Downloaded 747 times
-
martinvicanek
- Posts: 1334
- Joined: Sat Jun 22, 2013 8:28 pm
Re: Baq EQ example
regressor18 wrote:I will say the HS at higher frequencies is experiencing Nyquist warping.
Confirmed.
You could use my newer set of matched filters from here:
viewtopic.php?f=2&t=89976#p225010
These are supposed to handle cutoffs even beyond Nyquist. The DSP part is optimized ASM.
-
regressor18
- Posts: 12
- Joined: Thu Jun 25, 2015 3:23 pm
Re: Baq EQ example
Hey Martin,
Thank you for the reply!
When I use those filters, the filter crashes with a gain value of 0. Any idea what im doing wrong?
Thank you for the reply!
When I use those filters, the filter crashes with a gain value of 0. Any idea what im doing wrong?
- Attachments
-
- BaxEQ example HS issue.fsm
- (164.11 KiB) Downloaded 745 times
-
regressor18
- Posts: 12
- Joined: Thu Jun 25, 2015 3:23 pm
Re: Baq EQ example
I think i resolved the issue. Can someone take a look.
- Attachments
-
- BaxEQ example HS issue-Resolved.fsm
- (164.14 KiB) Downloaded 725 times
-
martinvicanek
- Posts: 1334
- Joined: Sat Jun 22, 2013 8:28 pm
Re: Baq EQ example
My bad, thank you for pointing this out. Fixed in version IVb in the original post.regressor18 wrote:the filter crashes with a gain value of 0. Any idea what im doing wrong?
Not for Q = 1 and above, unfortunately. Please use my fixed version IVb.regressor18 wrote:I think i resolved the issue.
-
regressor18
- Posts: 12
- Joined: Thu Jun 25, 2015 3:23 pm
Re: Baq EQ example
Hey Martin,
The HS is very unstable. If you move the gain knob back and forth it crashes the filter. Any suggestions?
The HS is very unstable. If you move the gain knob back and forth it crashes the filter. Any suggestions?
- Attachments
-
- BaxEQ example HS issue-unstable.fsm
- (164.21 KiB) Downloaded 753 times
-
martinvicanek
- Posts: 1334
- Joined: Sat Jun 22, 2013 8:28 pm
Re: Baq EQ example
No problems here with FS 3.0.8.1 or FS alpha. If you are using FS beta, that might be the problem.