If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
Users are reminded of the forum rules they sign up to which prohibits any activity that violates any laws including posting material covered by copyright
Using knobs to change Waveforms.
Using knobs to change Waveforms.
Hi Flowstoners!
Was wondering if there is a way to use a knob to change the Waveforms of the Oscs and LFOs. I've tried a lot of things, but cant seem to figure it out.
Cheers.
Was wondering if there is a way to use a knob to change the Waveforms of the Oscs and LFOs. I've tried a lot of things, but cant seem to figure it out.
Cheers.
Re: Using knobs to change Waveforms.
Hello Halon,
Do a search on morph/ing. Also most of the oscillators here just put out sine, triangle, saw, and square as basic waveforms. You would then pass them through wave shapers or most of the time a filter. Do a searh for shaper/s, fuzz, distoration, and etc..
Good luck, BobF.....
Do a search on morph/ing. Also most of the oscillators here just put out sine, triangle, saw, and square as basic waveforms. You would then pass them through wave shapers or most of the time a filter. Do a searh for shaper/s, fuzz, distoration, and etc..
Good luck, BobF.....
Re: Using knobs to change Waveforms.
BobF wrote:Hello Halon,
Do a search on morph/ing. Also most of the oscillators here just put out sine, triangle, saw, and square as basic waveforms. You would then pass them through wave shapers or most of the time a filter. Do a searh for shaper/s, fuzz, distoration, and etc..
Good luck, BobF.....
Thanks Bob.