If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
Users are reminded of the forum rules they sign up to which prohibits any activity that violates any laws including posting material covered by copyright
OWI Robotic Arm Edge
-
bradnorwood
- Posts: 14
- Joined: Mon Dec 12, 2011 6:58 pm
OWI Robotic Arm Edge
Does anyone know how to get this arm to work with Flowstone? I have OWI's technician contact info if anyone is interested or has tried? Brad
Re: OWI Robotic Arm Edge
Do you know if the arm uses servos or standard motors?
I believe that if you connected the leads to a servo/motor (whichever the arm uses) controller, you
should be able to make up a Flowstone program that can control it.
If you look in the "Flowstone Examples" section there are Flowstone programs for many different
controllers to get you started communicating between your computer and whatever controller you choose and the arm.
Hope this gets you started in the right direction!
I believe that if you connected the leads to a servo/motor (whichever the arm uses) controller, you
should be able to make up a Flowstone program that can control it.
If you look in the "Flowstone Examples" section there are Flowstone programs for many different
controllers to get you started communicating between your computer and whatever controller you choose and the arm.
Hope this gets you started in the right direction!
-
bradnorwood
- Posts: 14
- Joined: Mon Dec 12, 2011 6:58 pm
Re: OWI Robotic Arm Edge
it uses regular motors, it already has a board that goes to usb and I have software for it, I want to make custom software though